Get Them While They're Hot!

3D printed parts for the PRUSA MK3S+

These are the 3D printed parts for the PRUSA MK3S+ version. Parts have all been printed on an original Prusa MK3S+ with exceptional print quality. Parts are printed at 0.2mm layer height with 20% infill as per Prusa Specifications. Parts are all printed in Prusa PETG Prusament Jet Black and Prusament Orange as per the pictures – the full black version is also available. The fan shroud is Printed in Prusament ASA Parts are listed below with their appropriate revision numbers, if applicable. When building your printer, please read/refer to the official Prusa assembly manuals as they are all online.   These parts will help you to assemble your Chinese Prusa MK3S clone 3D Printer as the Aliexpress  (Fystec or Trianglelab) or Banggood sellers DO NOT provide any 3d printed parts to complete the printer and have to be purchased separately. The Chinese clones all have the silver power supply so please refer to the power supply assembly steps for a Prusa MK3 on the Prusa website. Here is a listing of the parts you will receive - Yaxis y-belt-idler – R4 y-motor-holder – R4 y-rod-holder (x4) – New MK3S+ version y-belt-holder – R4 y-belt-tensioner – R4 X Axis x-end-motor – R6 x-end-idler – R6 Z Axis z-axis-bottom L & R – R5 z-screw-cover (x2) z-axis-top L & R – R2 E Axis extruder-body – R6 adapter-printer – New MK3S+ Version fs-lever – New MK3S+ Version extruder-motor-plate – R6 extruder-cover – R6 extruder-idler – New MK3S+ Version x-carriage – R7 fs-cover – New MK3S+ Version print-fan-support – New MK3S+ Version fan-shroud – New MK3S+ Version Printed in Prusament ASA cable-holder – New MK3S+ Version x-carriage-back – R7 LCD LCD-cover-ORIGINAL-MK3 – R7 LCD-knob – New MK3S+ version lcd-supports – R1 Heatbed heatbed-cable-cover-clip – MK3S heatbed-cable-cover – MK3S Electronics Einsy-doors – R1 Einsy-hinges Einsy-base – R3 Extruder-cable-clip Heatbed-cable-clip

Quantity

1

Corgi 107 Batboat Red Jet Exhaust

This is a reproduction Jet Exhaust part moulded in red to suit the 1/43 scale Corgi 107 Batboat. This is a premium quality reproduction part that is comparable to the original with exceptional fit quality. *NB Colour depth may vary

Quantity

2

Corgi 267 Batmobile & 107 Batboat Batman Figure

This is a reproduction painted Batman figure to suit the Corgi 267 Batmobile and Corgi 107 Batboat. This is a quality reproduction part that is hand painted so subtle differences in paint application between figures is to be expected.

Quantity

7

Corgi 267 Batmobile & 107 Batboat Robin Figure

This is a reproduction painted Robin figure to suit the Corgi 267 Batmobile and Corgi 107 Batboat. This is a quality reproduction part that is hand painted so subtle differences in paint application between figures is to be expected.

Quantity

10

Corgi 267 Batmobile & 107 Batboat Steering Wheel

This is a reproduction plastic steering wheel to suit the 1/43 scale Corgi 267 Batmobile and 107 Batboat. This part can be used for all Corgi 267 Batmobile and 107 Batboat versions.

Quantity

2

Corgi 267 Batmobile 1966 Seat & Suspension Part

This is a reproduction red seat/suspension unit to suit the 1966 1/43 scale Corgi 267 Batmobile with Bathubs. This is a quality reproduction part that is almost comparable to the original with exceptional fit quality.

Quantity

2

Corgi 267 Batmobile Aerial

This is a reproduction plastic Aerial to suit the 1/43 scale Corgi 267 Batmobile. This part can be used for all Corgi 267 Batmobile versions.

Quantity

2

Corgi 267 Batmobile Black Horn Indicators

This is a reproduction Black Resin colour Horn indicator, to suit all versions of the 1/43 scale Corgi 267 Batmobile. This item will require a light mild detergent cleaning in order to be painted with Chrome/Silver paint.

Quantity

2

Corgi 267 Batmobile Blue Windshield Windscreen

This is a reproduction Blue tint windscreen to suit the 1/43 scale Corgi 267 Batmobile. This is a premium quality reproduction part that has good optical clarity, almost comparable to the original with exceptional fit quality. *NB - Colour depth may vary.

Quantity

14

Corgi 267 Batmobile Clear Windscreen Windshield

This is a reproduction Clear tint windscreen to suit the 1/43 scale Corgi 267 Batmobile. This is a premium quality reproduction part that has good optical clarity, almost comparable to the original with exceptional fit quality.

Quantity

2

Corgi 267 Batmobile Fixed Flame

This is a reproduction red plastic fixed flame to suit the 1/43 scale Corgi 267 Batmobile Whizwheel versions. This is a premium quality reproduction part that is almost comparable to the original with exceptional fit quality.

Quantity

4

Corgi 267 Batmobile Moving Flame

This is a reproduction plastic moving red flame to suit the 1966 1/43 scale Corgi 267 Batmobile Bathub versions. This is a premium quality reproduction part that is almost comparable to the original with exceptional fit quality.

Quantity

7

Corgi 267 Batmobile Rocket Tubes – Black Resin Finish

This is a reproduction set of Rocket Tubes - Black Resin Finish, to suit all versions of the 1/43 scale Corgi 267 Batmobile. This item will require a light mild detergent cleaning in order to be painted with Chrome/Silver paint.

Quantity

2

Corgi 267 Parts for Batmobile - 12 Red Rockets

This is a set of 12 (twelve) Red rockets/missiles to be used with the Corgi 267 Batmobile rocket launcher feature. These are a reproduction item. *NB – Colour depth may vary, some mould flash may be present.

Quantity

3

Corgi 267 Parts for Batmobile - 12 Yellow Rockets

This is a set of 12 (twelve) Yellow rockets/missiles to be used with the Corgi 267 Batmobile rocket launcher feature. These are a reproduction item. *NB – Colour depth may vary, some mould flash may be present.

Quantity

5

Corgi 267 Parts for Batmobile - Beacon Cage V2

NEW VERSION!! This is a reproduction/replica plastic gold Beacon Cage and red plug to suit the 1/43 scale Corgi 267 Batmobile. This part can be used for all Corgi 267 versions.

Quantity

5

Corgi 267 Parts for Batmobile - Red Rockets

This is a set of 4 (four) Red rockets/missiles to be used with the Corgi 267 Batmobile rocket launcher feature. These are a reproduction item.

Quantity

5

Corgi 267 Parts for Batmobile - Yellow Rockets

This is a set of 4 (four) Yellow rockets/missiles to be used with the Corgi 267 Batmobile rocket launcher feature. These are a reproduction item.

Quantity

5

Corgi 925 Batcopter Main Rotor Blades

This is a reproduction set of Main Rotor Blades and tail rotor for the Corgi 925 Batcopter. Product comes as seen, moulded in red plastic and you will need to paint the black lines along the top webbing marks. *NB - colour depth will vary from batch to batch.